Driveway Approach Concrete Lifting in Corunna, MI
Your driveway approach takes more abuse than almost any other section of concrete. Every vehicle entering and leaving the driveway puts pressure on the slab, and over time the soil underneath can begin to settle. That’s exactly what happened on this project in Corunna, MI.
The homeowner noticed the driveway approach had dropped where it met the street, creating a noticeable bump every time they drove over it. Water also began collecting around the low spot after rainstorms, making the problem worse over time.
Their goal was simple:
Restore a smooth transition. Improve drainage. Avoid replacing the driveway.
The Challenge
Although the driveway itself was still in good condition, the approach slab had settled several inches below its original height.
This created:
- A rough transition from the street to the driveway
- Water pooling along the driveway entrance
- Additional stress on adjoining concrete slabs
- An uneven appearance that hurt curb appeal
Replacing the approach would have required demolition, removal, and several days before the driveway could be used again.
The homeowner wanted a faster, more affordable solution.
What Caused the Settlement?
Like most sinking concrete, the problem started beneath the slab.
Common causes around Corunna include:
- Soil settlement beneath the concrete
- Water erosion washing away supporting material
- Poor soil compaction during construction
- Michigan freeze-thaw cycles
- Voids developing underneath the driveway approach
As the supporting soil weakened, the concrete gradually settled lower each year.
The Solution: Precision Driveway Lifting
Instead of replacing the concrete, Lift Rite Leveling used high-density polyurethane foam to lift and stabilize the driveway approach.
Our 3-Step Process
Step 1: Drill
Small access holes were drilled in carefully selected locations across the settled slab.
Step 2: Lift & Stabilize
High-density polyurethane foam was injected beneath the concrete. As the foam expanded, it filled hidden voids and gently lifted the driveway approach back to the proper elevation.
The lifting process was carefully monitored to achieve a smooth transition without overcorrecting.
Step 3: Patch & Finish
Once the slab was level, the small drill holes were patched and cleaned, leaving minimal visible evidence of the repair.
The Results
Within just a few hours, the driveway approach looked and performed like it should.
- Smooth transition from the street to the driveway
- Water drainage improved
- Hidden voids filled and stabilized
- Existing concrete preserved
- No demolition or replacement required
- Driveway ready for normal use the same day
The homeowner was thrilled to restore both the appearance and functionality of the driveway without the cost of replacement.
Why Lifting Was the Smart Choice
Driveway approaches are one of the most common places for settlement, but they usually don’t need to be replaced.
By lifting and stabilizing the existing slab, this homeowner:
- Saved thousands compared to replacement
- Eliminated the harsh bump entering the driveway
- Improved drainage around the driveway entrance
- Extended the life of the existing concrete
- Avoided days of construction and cleanup
Concrete lifting corrected the problem beneath the slab while preserving the driveway above it.
Sinking Driveway Approach in Corunna, MI?
If your driveway entrance has settled, developed a bump, or collects water after rain, Lift Rite Leveling can help.
We proudly serve Corunna, Owosso, Flushing, Saginaw, Flint, and surrounding Mid-Michigan communities with professional polyurethane concrete lifting and stabilization.
Restore your driveway the smart way—lift it, don’t replace it.