Front Walkway Concrete Lifting in Flushing, MI
A safe, level front walkway makes a great first impression and helps protect family members and guests from unnecessary trips and falls. On this project in Flushing, MI, the homeowner noticed their front walkway had settled where it met the front stoop, creating an uneven step that had become increasingly noticeable over the years.
The concrete itself was still in good condition, but the slab had lost support underneath, causing part of the walkway to sink.
The homeowner wanted to:
Eliminate the trip hazard. Restore a smooth entrance. Avoid replacing the concrete.
The Challenge
The front walkway had settled just enough to create an uneven transition at the front steps. While the height difference wasn’t extreme, it was enough to catch a foot when entering or leaving the home.
The homeowner was concerned about:
- A trip hazard for family members and visitors
- Continued settlement over time
- Water collecting around the front entrance
- The expense of removing and replacing the walkway
Since the concrete was structurally sound, replacing it didn’t make sense if it could be restored.
What Caused the Settlement?
The problem started beneath the concrete—not on the surface.
Common causes of walkway settlement around Flushing include:
- Natural soil settlement beneath the slab
- Water washing away supporting soil
- Freeze-thaw cycles causing ground movement
- Poor soil compaction during original construction
- Small voids forming beneath the concrete over time
As the supporting soil weakened, the walkway gradually settled near the stoop.
The Solution: Precision Concrete Lifting
Rather than replacing the walkway, Lift Rite Leveling used polyurethane concrete lifting to restore the slab to its proper height.
Our 3-Step Process
Step 1: Drill
Small, carefully placed access holes were drilled into the settled section of the walkway.
Step 2: Lift & Stabilize
High-density polyurethane foam was injected beneath the slab. As the foam expanded, it filled hidden voids and gently lifted the walkway until it matched the front stoop.
The process was controlled and precise to create a smooth, even transition.
Step 3: Patch & Finish
After the concrete was level, the small drill holes were patched and cleaned, leaving only minimal evidence of the repair.
The Results
The entire repair was completed in just a few hours.
- Trip hazard eliminated
- Walkway restored to a smooth, level surface
- Hidden voids filled and stabilized
- Existing concrete preserved
- No demolition or replacement required
- Walkway ready for normal use the same day
The homeowner was pleased to have a safer front entrance without the cost and disruption of installing new concrete.
Why Lifting Was the Smart Choice
Front walkways often settle long before the concrete reaches the end of its lifespan.
By lifting the existing slab, this homeowner was able to:
- Save thousands compared to replacement
- Restore safe access to the front door
- Preserve the existing concrete
- Correct the underlying support problem
- Improve the home’s curb appeal
Concrete lifting repaired the cause of the settlement while keeping the original walkway intact.
Uneven Front Walkway in Flushing, MI?
If your front walkway has settled near the steps or developed a trip hazard, Lift Rite Leveling can help.
We proudly serve Flushing, Saginaw, Flint, Mt. Morris, Bay City, Midland, and surrounding Mid-Michigan communities with professional polyurethane concrete lifting and stabilization.
Restore your concrete the smart way—lift it, don’t replace it.